Grade 80 Swivel Eye Bolt with Load Ring Features & Benefits

When loads need an additional lifting point and also will need to be lifted in a set up where the slings are positioned at an angle then the  swivel eye bolt with load ring grade 80 could be the answer.
The eyebolt can be screwed to a suitable location. Once secure the main eye can be swivelled through 360 degrees.
Fitted to this eye is an additional lifting ring which can pivot through 180 degrees. This means that the swivel eye bolt can be precisely positioned in line with the pulling angle.

There is a load angle chart which should be referred to. This will show the type of lift and angles allowed and also includes any changes to the maximum safe working load that must be used. (see the PDF specifications file below).

More Information on the swivel eyebolt with ring

The grade 80 steel used for manufacture of these swivel eye bolts has been quenched and tempered for optimum strength. The minimum breaking load comes in at 4 times the stated WLL. So as far as safety of the eye bolt is concerned you’re well covered as long as you stick to the stated SWL.

These swivel eye bolts come stamped with the CE mark and manufacturers ID. Material grade and SWL are also clearly marked. Full certification can be provided if required.

Other options you may wish to consider is the grade 80 swivel hoist ring. Lifting slings are also available from our Lifting Equipment Store in the form of duplex web slings, round slings and chain slings. Get in touch for help or advice should you need it.